Polyurethane (PU) release agent-Ejection from the type of_AILPSS“澳卢实业发展(上海)有限公司

企业概况 / Company Profile

Polyurethane (PU) release agent

Polyurethane (PU) release agent

一本品性能: A product performance:

主要成分是聚二甲基硅氧烷，具有极好的热稳定性和化学稳定性，脱模和隔离效果优异，不腐蚀模具，在模具表面不残存分解物，制品外观平滑美观，不影响制品的粘合性和受漆力，不污染模具。 Main component is polydimethylsiloxane, has excellent thermal stability and chemical stability, excellent mold release and isolation, non-corrosive mold, the mold surface residual decomposition, product appearance smooth and beautiful, does not affect the products paint adhesion and by force, do not pollute the mold.

本品是纯有机硅的浓缩液，无毒无味，闪点高，安全。 This product is a concentrated solution of pure silicone, non-toxic tasteless, high flash point and safety.

本品用石油醚或溶剂油稀释后使用，稀释倍率高。 The product oil with petroleum ether or diluted with solvents, dilution rate high.

二、主要用途： Second, the main purposes:
聚氨酯鞋底（聚酯型），聚氨酯轮胎； Polyurethane soles (polyester), polyurethane tires;
聚氨酯弹性体、各种胶辊、各类密封件； Polyurethane elastomer, a variety of rubber roller, all kinds of seals;
自结皮沫塑料制品. Since the crust foam plastic products.

三、技术指标： Third, technical indicators:
外观：无色或浅黄色透明液体密度：约0.99 Appearance: colorless or light yellow transparent liquid Density: about 0.99
有效成分：约100％ Active ingredient: approximately 100%
黏度：约180 （mPa。s／250C） Viscosity: about 180 (mPa. S/250C)
闪点：约152 ℃ Flash point: about 152 ℃
稀释剂：芳香、脂肪和氯化烃类，石油溶剂 Diluents: aromatic, fat and chlorinated hydrocarbons, petroleum solvents

四、使用方法： The use of methods:
将模具加温至50 ℃以上。 The mold heated to above 50 ℃.