Multifunctional additives-Paint color paste Ink Additives_AILPSS“澳卢实业发展(上海)有限公司

企业概况 / Company Profile

Multifunctional additives

Paint using multi-functional additives

RF-AMP95

典型特性 Typical Characteristics

中和当量 And equivalent in		93-97 93-97
在20℃时蒸汽压，mmHg/pa Vapor pressure at 20 ℃, mmHg / pa	mmHg/pa mmHg / pa	0.08/10.4 0.08/10.4
比重 Proportion	25℃ 25 ℃	0.942 0.942
粘度 Viscosity	25℃ 25 ℃	147厘泊 147 cps
	10℃ 10 ℃	561厘泊 561 cps
	－2℃ -2 ℃	凝固 Solidification
闪点 Flash point	开杯 Open Cup	78℃ 78 ℃
闪点 Flash point	闭杯 Closed Cup	83℃ 83 ℃
表面张力 Surface tension	原液 Liquid	37达因/厘泊 37 dyne / cps
表面张力 Surface tension	10％水溶夜 10% of the water soluble Night	58达因/厘泊 58 dyne / cps

在研制阶段加入AMP-95的好处 Stage in the development of the benefits of joining AMP-95

☆ 当与传统分散剂配合使用时可减少分散剂的用量 ☆ When used in conjunction with conventional dispersants may reduce the amount of dispersant
☆ 使颜料发挥最优化的分散效果 ☆ play the pigment dispersion optimized
☆ 由于分散剂用量减少而使泡沫降低 ☆ leaving the bubble dispersing agent reduces the amount of reduction
☆ 有效控制PH值 PH value of effective control ☆
☆ 降低配方成本 ☆ lower formulation costs

在调制阶段加入AMP-95的好处 In the modulation stage the benefits of joining AMP-95

★ 改进增稠剂的性能 ★ improve the performance of thickener
★ 避免使用氨水，减少涂料气味 ★ Avoid using ammonia to reduce the paint smell
★ 改进调色浆的展色性 ★ transfer colorant to improve color development

AMP-95改进漆膜性能 AMP-95 to improve film properties

☆ 改进耐擦洗性和耐水性 ☆ improved scrub resistance and water resistance
☆ 降低罐中腐蚀和闪锈，有效的减少系统的气味 ☆ reduce tank corrosion and flash rust, effective odor reducing system
☆ 不造成体系的挥发性有机成分（VOC）增加 ☆ does not cause system of volatile organic compounds (VOC) to increase

建议使用量 Recommended use

在研磨阶段：AMP-95作为共分散剂使用，最佳使用方法是代替现有体系分散剂固体30%，一般AMP-95的用量为配方总量的0.05～0.1%。 In the grinding stage: AMP-95 is divided into powder used as the best way is to replace the existing system using the dispersant solid 30%, the general AMP-95 for the formulation of the total amount of 0.05 to 0.1%.

在调漆阶段：在典型配方中，为获取最佳PH稳定性、增稠性、理想的中和度和消除罐中腐蚀，AMP-95的需用为配方总量的0.1～0.3%。 Stage in the paint: In a typical formulation, for access to the best PH stability, thickening, and the degree of the ideal and the elimination of tank corrosion, AMP-95's required for the formulation of the total 0.1 to 0.3%. 而为控制闪蚀还需要提高颜料分散效率。 The flash for the control of erosion also need to improve the efficiency of pigment dispersion.