Hammer agent-Paint color paste Ink Additives_AILPSS“澳卢实业发展(上海)有限公司

企业概况 / Company Profile

Hammer agent

Hammer agent

RF-803

本品采用高分子量聚硅氧烷溶液。 This product is of high molecular weight polysiloxane solution.

高分子量聚硅氧烷溶液优点锤纹均匀,精美无色透明液体，立体感强烈，附着力好，滑爽性好等优点。 Advantages of high molecular weight siloxane hammer uniform, fine colorless transparent liquid, three-dimensional sense of strong, good adhesion, smooth and good.

一、特征： First, the characteristics:
外观：无色、透明液体。 Appearance: colorless, transparent liquid.
二、特性及应用： Second, the characteristics and applications:
1 、该助剂为改性硅系助剂，用于各种锤纹漆中提高其立体效果。 1, the additive for the modification of silicon additives, for a variety of hammer paint to enhance its three-dimensional effect. 一般加入 General to join

量少花纹大，加入量多花纹小。 Less pattern of large, adding a small quantity pattern.
2、按花纹外观不同加入不同量助剂，因为每批锤纹漆的花纹都会有些不同 2, according to the appearance of different patterns by adding different amounts of additives, for each batch of paint hammer will be somewhat different pattern

甚至同批次产品在不同时间使用也会有所差异，所以应在加入前作加入 Even the same batch used at different times may vary, so should be added before the accession

量试验。 The amount of testing.
3、使用量一般为全漆量的0.1％～0.5％，生产前应作最佳量试验。 3, the use of paint for the whole amount of generally 0.1% to 0.5%, the amount of pre-production should be the best test.
4、本助剂通常在最后调漆稀释时加入。 4, the additives are usually diluted in the final paint was added.
三、包装及注意事项： Third, the packaging and notes:
1、包装：25Kg，50 Kg塑料桶。 1, Packaging: 25Kg, 50 Kg plastic drum.
2、贮运：禁止火种，避免日晒，存放于阴凉通风处。 2, storage and transportation: the prohibition fire, avoid the sun, stored in a cool ventilated place.
3、本助剂及溶剂应单独存放，尽量用于锤纹漆生产中，特别注意不要造成污染。 3, the additive and solvent should be kept separate as far as possible for the hammer paint production, special care not to cause pollution.